American Ceramics Home
HPAcslos01
HPAOCA

RETAIL/WHOLESALE DISTRIBUTORS

2442 Ludelle Street  Fort Worth, Texas  76105
Toll Free: 1-866-535-2651  Fax: 1-817-536-7120

The Pottery Consultant

Home

Site Index

Contact

Directions - Hours

Paragon Kiln Logo

PARAGON GLASS
CLAM SHELL KILNS

American Ceramic Supply Company offers
great discounts on all Paragon Clam Shell Kilns.
Just check out these discounts! You can e-mail us at
sales@AmericanCeramics.com if you need any help with
technical support, best kilns and/or specific shipping needs.

Paragon Kiln Logo

Please note: Kiln Furniture Kit sale prices below are priced based on buying  the Kit at the same time of Kiln purchase. Prices will be more if bought separately.

When you buy a Paragon Kiln from American, we help with kiln prep, test fire, cone results and firing schedules.
All kilns listed below are priced for 240V, single phase. For all 3 phase, add $75.00 to kiln price

Paragon Kiln CS14D

Paragon Clam Shell - CS14-D -
Double Clam Shell

Watch an Interactive Video Demo on How To Use 3 Key Controller!

Paragon Digital Clam Shell Kiln - CS-16S - Single
Retail:
$1480.00  Your price - $1184.00
16" square x 6 1/2" deep, 1700 degrees,  120V - pulls 15 amps
.96 Cu. Ft., 3 Key Sentry Xpress Controller
Furniture Kit - Retail - $76.00 Your price - $60.00

1 Square Shelf, 4 1” posts, bag of glass separator.
Paragon’s square CS-16S digital clamshell glass kiln operates on a standard household outlet and fires up to nine 4” x 4” glass tiles. Imagine the murals you could make with this kiln. Fire small glass bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy adding glittering dichroic glass to your work of art. When you own a Paragon CS-16S kiln, you can experiment with glass fusing to your heart’s content. The CS-16S clamshell heats from the top for even heat distribution across the glass surface. The lid elements are mounted in pinless element grooves. Element pins are no longer needed because the element coils are wider than the groove opening. This helps eliminate dust in the firing  chamber.
     The walls and top, as a single unit, lift up and out of the way so you can  assemble glass pieces inside the kiln. Add stringers and frit to delicate designs, often without using glue. When the kiln shelf is loaded and you are ready to fire, lower the kiln in place. The kiln is easy to open because of two counter-weight springs mounted under the kiln. The kiln base extends 4” in the back to support the weight of the kiln when in the open position. The base comes with mar-proof rubber feet.

Paragon Digital Clam Shell Kiln - CS-14D - Double
Retail:
$1438.00  Your price - $1150.00
14" square x 6 1/2" deep, 1700 degrees,  120V - pulls 15 amps
.73 Cu. Ft., 3 Key Sentry Xpress Controller
Furniture Kit - Retail - $70.00  Your price - $56.00

1 12” x 12” Square Shelf, 4 1” posts, bag of glass separator.

Paragon Digital Clam Shell Kiln - CS-16D - Double
Retail:
$1515.00  Your price - $1212.00
16" square x 6 1/2" deep, 1700 degrees,  120V - pulls 15 amps
.96 Cu. Ft., 3 Key Sentry Xpress Controller
Furniture Kit - Retail - $75.00 Your price - $60.00

1 Square Shelf, 4 1” posts, bag of glass separator.

Paragon Digital Clam Shell Kiln - CS-19D - Double
Retail:
$2130.00  Your price - $1704.00
19" square x 6 1/2" deep, 1700 degrees,  240V
1.35 Cu. Ft., 3 Key Sentry Xpress Controller - not CSA or UL Listed.
Furniture Kit - Retail - $139.00 Your price - $111.00

1 Square Shelf, 4 1” posts, bag of glass separator.

The CS-14D and CS-16D & CS-19D are dual-opening: You can open the kiln by lifting the kiln body or by lifting only the lid. Lift the kiln body out of the way to assemble glass directly on the shelf; open the lid to load glass over a slumping mold.The clam shell kiln can be opened by lifting the kiln body or the kiln lid, but never both at the same time. The kiln is equipped with safety latches on the side. The gravity-operated top latch holds the lid closed; the lever-operated bottom latch holds the kiln body closed.
 

Paragon Kiln Pearl 22

Paragon Kiln Pearl-22 Clam Shell - $3239.00  Your price - $2591.00
22" square x 13" deep, 1700 degrees 240V, Single Phase, 3.64 Cu. Ft.
12 Key Sentry 2 Controller standard on this kiln!
Furniture Kit  - Retail - $164.00 Your price - $131.00

Electrical components are mounted inside the base of the kiln. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life. The Pearl-22 uses the digital 12-key Sentry 2.0 controller. You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean. For Stand Options, Click Here.
Mercury Relay Upgrade - STANDARD on this model!

All prices are subject to change without notice due to manufacturer's price increases and fuel surcharges with shipping companies.
We reserve the right to adjust pricing accordingly.
Please check with us prior to billing to be sure you have correct pricing.
Please be advised - Paragon Kiln Manufacturing Policy - Small hairline cracks in kiln brick are cosmetic
and do not affect the firing performance of a kiln.

Back to Kilns Main Page

Back to Main Paragon Kilns Page

Back to American Home Page

HPMCV
Discoverlogo

E-Mail Us!

[AmericanCeramicSupplyHome] [Kilns] [SkuttKilns] [ParagonKilns] [OlympicKilns] [AmacoExcelKilns] [HowtoChooseaKiln] [KilnVents] [FiringandConesSupportCenter] [CeramicSupportCenter] [Stilts] [Orton] [ReceivingKilnFreightDeliveries] [KilnWarranties] [FreeLayawayKilnsWheels] [ParagonKilnModels] [SkuttKilnModels] [OlympicKilnModels] [CressKilns] [CommercialIndustrialKilns] [KilnsLowPricePolicy] [KilnsBestTopSellers] [PottersWheels] [PotteryEquipment] [CeramicPaintsGlaze] [CeramicMolds] [CeramicClasses] [CeramicBrushesTools] [CeramicClaySlips] [ACSCSiteIndex] [CeramicBooksVideosDVDs] [CeramicAccessories] [CeramicBisque] [AboutUs] [ACSCFiredArtsLinks] [ContactAmerican] [PaintYourOwnPottery] [CeramicStartupPackages]

MASTER DISTRIBUTORS FOR:
Mayco Colors and Bisque
Duncan Colors and Bisque - I Love to Create
Paragon Kilns     Orton Vents & Cones
Skutt Kilns   Thomas Stuart Wheels
Olympic Kilns
Creative Paradise  Lehman Ceramic Equipment
Royal Brushes   Shimpo Ceramic Equipment
AMACO/Brent Color, Wheels and Slab Rollers

FEDEXicon
uspslogo (300x300)

American Ceramic Supply Company, Inc. - est. 1975
American Glass Supply Co.
The Pottery Consultant
copyright 1976 - 2019 - all rights reserved