 |
|
|
Special! -
each Janus kiln comes with FREE Glass, FREE thin fire paper, FREE Test Cones and personalized walk through on kiln furniture prepping, pushing buttons and firing results.
|
|
|
|
The new Paragon Janus-1613 can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.
Select between glass and pottery with the flip of a switch. When the switch is in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.
The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently, evenly radiating heat onto the glass.
A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.
The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold.
|
|
|
|
|
Paragon Janus-1613 - Retail Price - $1690.00 Your price - $1265.00
16 1/2", 8 sided x 13 1/4" deep, 2350 degrees, Cone 10, 1.75 Cu. Ft.
Vent - Your price - $345.00
Furniture Kit - Retail - $110.00 Your price - $88.00
The furniture kit consists of carefully selected fire clay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.
2 C-18 (15” Round x 5/8”) Shelves, 1 C-18 1/2 Shelf
1" Square Posts, 3 each - 1/2”, “, 2”, 3”, 4”, 6”
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 28 lbs.
Add AOP - $85.00
|
|
|
|
|
 |
|
|
|
The new Paragon Janus-23 can fire both pottery and glass. Heating elements are mounted in the lid and sidewalls.
Select between glass and pottery with the flip of a switch.
The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.
The lid on the Janus-23 is easy to lift with the exclusive, patented Paragon spring counter-balance. For easier maintenance, Paragon uses 2” high blank wall bricks in the top row. Since the brick is without element grooves, it is less susceptible to damage during loading.
The patented control box on the Janus-23 opens forward for easy maintenance. A folding support arm holds the box in the open position.The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold.
|
|
|
|
|
Paragon Janus-23- Retail Price - $2750.00 Your price - $2065.00
22 1/2", 10 sided x 20 1/4" deep, 2350 degrees, Cone 10, 5.10 Cu. Ft.
Vent - Your price - $345.00
Furniture Kit - Retail - $300.00 Your price - $240.00
The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.
6 C-23H 1/2 Shelves, 20” round x “¾” thick
1” wide Square Posts, 8 of each - 1”, 2”, 3”, 4”, 5”, 6” lengths
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 77 lbs.
Add AOP - Your price - $85.00
|
|
|
|
|
 |
|
|
|
 |
|
|
|
The new Paragon Janus-27 can fire both pottery and glass. Heating elements are mounted in the top and sidewalls. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.
The lid on the Janus-27 is easy to lift with the exclusive, patented Paragon spring counter-balance. For easier maintenance, we use 2” high blank wall bricks in the top row of the Janus-27. Since the brick is without element grooves, it is less susceptible to damage during loading.
The patented control box on the Janus-27 opens forward for easy maintenance. A folding support arm holds the box in the open position.
The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold. It is manufactured by the Orton Ceramic Foundation exclusively for Paragon.
|
|
|
|
|
|
Paragon Janus 27 - Retail Price - $3030.00 Your price - $2270.00
28" wide x 12 sided x 22 1/4" deep, 2350 degrees, Cone 10, 8.11 Cu. Ft.
Vent - Your price - $345.00
|
|
|
Furniture Kit - Retail - $470.00 Your price - $375.00
The furniture kit consists of carefully selected fire clay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.
6 C-24H 1/2 Shelves (26” round x ¾” thick)
1 1/2” wide Square Posts, 6 of each -
1”, 2”, 3”, 4”, 5”, 6” lengths
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 145 lbs.
Add AOP - Your price - $85.00
|
|
|
|
|
|
 |
|
|
|
The Paragon Janus Ovation can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.
Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces in pottery mode.
The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently. The lid element grooves and inner lid surface are coated for long life.
The patented control box on the Janus Ovation opens forward for easy maintenance. A folding support arm holds the box in the open position.
The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold.
|
|
|
|
|
Paragon Janus Ovation Oval Kiln
Retail Price: $4,280.00 YOUR price: $3210.00
22 1/2” wide x 41 1/2” long x 11” deep, 5.2 cubic feet
Vent - Your price - $345.00
Furniture Kit - Retail - $495.00 Your price - $405.00
The furniture kit consists of carefully selected fire clay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.
6 C-22D Shelves (21” x 17 1/2” x 5/8” thick)
1 1/2” wide Square Posts, 8 of each -
1”, 2”, 3”, 4”, 5”, 6” lengths
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 119 lbs.
Add AOP - Your price - $85.00
Add Lid Safety Switch - Your price - $60.00
Add View Window - Your price - $60.00
|
|
|
|
|
|
|
Paragon Janus Dragon Kiln
Retail Price: $6630.00 YOUR price: $4,825.00
24” wide x 27” high x 24” deep, 9 cubic feet
Cone 10, 2350 degrees
Features:
Glass/pottery selection switch
Saves electricity with extra insulation
Heating elements in the walls and roof mounted in recessed grooves
Cone 10, 2350 F
3” insulating firebrick and 1” non-organic block insulation in walls, top and door: 4” total thickness
4 1/2” thick firebrick bottom
9 cubic foot Interior: 24" wide x 24" deep x 27" tall
Long-lasting mercury relays
Type K thermocouple or optional Type-S
Sentry 2.0 controller with programmed cool-down
Case temperature at cone 10: 170°F (compared to 400-500°F for standard firebrick kilns)
Two tapered peepholes in the side
1” space between switch box and kiln keeps electrical components cooler for long life.
Hinged switch box opens easily for maintenance.
UL/CUL & NEC compliant fuses for safety
Available in 200, 208, 220, 240, 480 v, 1 & 3 phase
Proportional power elements for more even heating
Furniture Kit - Retail - $560.00 Your price - $450.00
1 C-30 Shelf (22” x 22” x 1”)
4 - C30H 1/2 Shelf
1 1/2” wide Square Posts, 8 each of -
4”, 6”, 8” lengths
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 130 lbs
Vent Side Mount Installed - Your price - $425.00
AOP Outlet - Your price - $85.00
24" Tall Stand w/o Casters - Your price - $395.00
24" Tall Stand w Casters - Your price - $595.00
8" Tall Stand w Casters - Your price - $545.00
Door Elements - Your price - $365.00
Stainless Steel Finish - Your price - $320.00
APM Elements - Your price - $775.00
S Type Thermocouple - Your price - $185.00
|
|
|
|
|
All prices are subject to change without notice due to manufacturer's price increases and fuel surcharges with shipping companies. We reserve the right to adjust pricing accordingly.
Please check with us prior to billing to be sure you have correct pricing.
Please be advised - Paragon Kiln Manufacturing Policy - Small hairline cracks in kiln brick are cosmetic and do not affect the firing performance of a kiln.
|
|
|
|
American Ceramic Supply Company has been selling and servicing ceramic kilns to the ceramic industry, schools, individuals and studios for over 35 years. Based in Fort Worth, Texas, American Ceramic Supply Company services and supplies ceramic equipment and supplies to traditional ceramic shops, paint your own pottery studios, ceramic potters, art teachers and art educators, ceramic and pottery finished ware producers, ceramic and pottery home based hobbyists. American Ceramic Supply Company provides education, training and consulting services to traditional ceramic shops, paint your own pottery studios, potters, art teachers and art educators, ceramic and pottery finished ware producers and home based hobbyists. American Ceramic Supply also educates and assists the architects, contractors, builders and electricians for our customers as they create their ceramic shops, paint your own pottery studios, ceramic rooms in their new schools and buildings and in their homes.
American Ceramic Supply Company and American Glass Supply Company sell ceramic kilns including Paragon Kilns, Skutt Kilns, Amaco/Excel Kilns, and Olympic Kilns. Paragon’s Kilns include the Touch and Fire electric automatic kilns such as the TnF 82, TnF23, TnF24, TnF27 and TnF28’s, the Ovation kilns, Dragon and Super Dragon kilns, Iguana Kilns, Caldera and Clamshell Kilns, Janus kilns, as well as the small kilns such as the SC series kilns, heat treating kilns, doll and porcelain kilns. Skutt kilns include the Kiln Master kiln series - the popular KM818, KM1018, KM1027, KM1218, KM1227-3 and KM1231 kilns, the Glass Master kiln line such as the GM814, GM1014, GM1214 - the very popular GM1414 coffin kiln, and the production glass kiln line - the GM818, GM1018 and the GM1227-3 as well as the Skutt Hot Start Pro Kiln and the new Firebox kilns - Firebox 8 and Firebox 14 including the clamshell kiln GM22. Through American Ceramic Supply Company, Olympic Kilns has fantastic gas and glass kilns, raku kilns, electric - manual and automatic kilns such as the Dual Media Kilns, the Champ kiln, the Freedom Series kilns, the Commercial Electric kilns, and the Torchbearer Gas kilns- both available as propane or natural gas kilns. Amaco kilns and Excel Kilns are very popular kilns with teachers and art educators. Front loading kilns, top-loading kilns, professional kiln line series, Fine Art kilns, Professional Kiln series, and metal enameling kilns are all part of the Amaco kilns and Excel kilns production series. Whether you need a pottery kiln, jewelry kiln, silver art clay kiln, glass fusing kiln, glass slumping kiln, knife heat treating kiln, clay tile production kiln, low fire kiln, high fire kiln, 120V kiln, 240V kiln, 208V kiln or even a 480V kiln! - American Ceramic Supply Company can provide you with just the kiln for your very special needs and desires to last you for a very long time!
American Ceramic Supply Company continues to sell, service, educate and provide on-going marketing and technical support to the ceramic and pottery industry. Our goals are the best customer service we can possibly offer, generosity of information to our customers so that they can succeed and accomplish their ceramic dreams and desires and
doing the right thing by God and Country.
|
|
|
|
American Ceramic Supply Company, Inc. - est. 1975
American Glass Supply Co.
The Pottery Consultant
copyright 1996 - 2012 - all rights reserved
|
|
