Home

• Digital Sentry Xpress with 8 Segment Ramp-Hold, Skip Segment & Program Review
• On/off switch
• Safety pilot light
• The element groove in the roof eliminates pins.
• 2 1/2” insulating refractory firebricks in the roof, walls, and bottom
• The element is seated in the top of the kiln.
• Electrical components stay cool in a slotted base. No extra stand is needed.

Paragon F-120 Lamp Working Kiln - w/ Conversion Stand included
Retail - $2412.43
Your price - $2171.19
10 3/4” wide x 7” high x 11” deep, .47 cu. ft., 1700 degrees F, 120V
Furniture Kit - Retail - $83.86 - Your price - $75.48

Ships Truck
Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns
Design programs with up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in the simplified Single Speed mode.
Ramp-Hold mode can store 4 programs.
Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram. Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints. Add Hold Time during firing without having to stop the kiln to reprogram. Control both heating and cooling in Ramp-Hold.
Program Review lets you check the program you are about to fire.
Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln. Temperature display throughout firing and cooling in your choice of °F or °C Thermocouple Offset adjusts the thermocouple readout.
Set the Delay to turn on the kiln later to suit your schedule.
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element. 12 Month Warranty
LED Lights show whether you are in program, review, or firing mode.

Paragon F-130 ELITE Lamp Working Kiln
Retail - $2769.43
Your price - $2492.49
11” wide x 13” high x 11” deep, .9 cu. ft.,
1700 degrees F, 120V
3” Brick & Mercury Relay is now standard on this kiln!
Slide out mandrel holder is standard - adjustable.
New and Improved has sidewall elements standard.
Furniture Kit - Retail - $92.25 Your price - $83.03

HAS ALL the 3 Key Controller Features as the F120

     Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you a haven of creative enjoyment that you will enjoy for many years.Anneal large glass figurines in the digital F-130 Elite lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod extends outside the firing chamber through the smaller punty rod door. This allows the glass to anneal safely.
     You can make figurines up to 11” tall in the F-130 Elite. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller. Ships Truck.

Paragon F-200 Lamp Working Kiln
Retail: $3510.10
Your price: $3159.09
25” wide x 8” high x 15” deep, 1.73 cu. ft.,
1700° F, 240V
Add Mercury Relay Upgrade - Please ask for pricing.


HAS ALL the 3 Key Controller Features as the F120 & F130 Elite
Not CSA or UL Certified.

Paragon F-240 Lamp Working Kiln w/ Solid State Relay
Retail - $4120.07
Your price - $3708.07
18” wide x 13” high x 18” deep, 2.4 cu. ft.,
1700 degrees F, 240V, 288 lbs. - Ships Truck
3” Brick & Mercury Relay are now standard on this kiln!
Slide out mandrel holder is standard - adjustable.
New and Improved has sidewall elements standard.
Lid Elements can be added to this kiln as well as a safety switch.
Furniture Kit - Retail - $134.27 Your price - $120.84
NEW! - Control Panel now has sloped front panel.
HAS ALL the 3 Key Controller Features as the F120 & F130 Elite

     Ease of operation will delight you. Never before has lamp work been so easy in this price range. Imagine the massive, award-winning figurines you will be able to make with this kiln.
     The sidewall elements are mounted in dropped, recessed grooves that protect the element for long life.
     Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you a haven of creative enjoyment that you will enjoy for many years.
On/off switch
Safety pilot light
2” insulating refractory firebricks in the roof, walls, and bottom
Electrical components stay cool in a slotted base. No extra stand is needed.

Paragon F-500 Lamp Working Kiln
Retail: $5443.75
Your price: $4899.38
24” wide x 22.25” high x 18” deep,
5.5 cu. ft.,
1200° F, 240V
601 lbs. Truck Ship
3” Brick and Mercury Relay are standard on this kiln!
Slide out mandrel holder is standard - adjustable.


HAS ALL the 3 Key Controller Features
as the F120 & F130 Elite
Not CSA or UL Certified.

E-Mail Us!

MASTER DISTRIBUTORS FOR:
Mayco Colors and Bisque
Duncan Colors and Bisque - I Love to Create
Paragon Kilns     Orton Vents & Cones
Skutt Kilns   Thomas Stuart Wheels
Olympic Kilns
Creative Paradise  Lehman Ceramic Equipment
Royal Brushes   Shimpo Ceramic Equipment
AMACO/Brent Color, Wheels and Slab Rollers