American Ceramics Home
HPAcslos01
HPAOCA

RETAIL/WHOLESALE DISTRIBUTORS

2442 Ludelle Street  Fort Worth, Texas  76105
Toll Free: 1-866-535-2651  Fax: 1-817-536-7120

The Pottery Consultant

Home

Site Index

Contact

Directions - Hours

PARAGON SMALL GLASS KILNS

Paragon Kiln Logo Paragon Kiln Logo

American Ceramic Supply Company offers
great discounts on all Paragon Kilns.
Just check out these discounts! You can e-mail us at
sales@AmericanCeramics.com if you need any help with
technical support, best kilns and/or specific shipping needs.

When you buy a Paragon Kiln from American, we help with kiln prep, test fire, cone results and firing schedules.
All kilns below are priced for either
120V or 240V, single phase.
For 3 Phase, add $50.00

Check it out! Aren’t these fabulous?! You can order any of the SC series, E series,
Q series and BlueBird kilns in these fantastic HOT NEW Colors! We LOOOVE them - choose Hot Pink, Purple or Turquoise - only adds $50.00 to cost of kiln!

Want to order?  Just call our toll free number - 1-866-535-2651 -
We can process your order securely right over the phone and get your
kiln on the way to you - or come on in to our showroom and
let us help you select just the right kiln for all your firing needs!

paragon Kiln SC 2

For: Silver Clay, Decals, China Paint, Enameling, Fusing Glass

Automatic-Digital
Paragon Kiln SC-2 - $785.00  Your price - $655.00 (pictured)
8" w x 5 3/4" h x 7 3/4" deep, Cone 03 - 2000 degrees, .19 Cu. Ft., 120V
Paragon Kiln SC-2 with Bead Door - $815.00 -  Your price - $685.00
Same specs as SC-2
Paragon Kiln  SC-2 with Window - $835.00  Your price - $705.00
8" w x 5 3/4" h x 7 3/4" deep, Cone 03 - 2000 degrees, .19 Cu. Ft., 120V
Paragon SC-2 with Door and Window - $850.00  Your price - $720.00
same specs as SC-2 with window - (pictured to the left bottom)
All above come with 1/4” thick fiber shelf and test glass FREE!

Paragon Kiln SC-3 - $890.00  Your price - $755.00
7 3/4" w x 7 3/4" h x 8" deep, Cone 03 - 2000 degrees, .28 Cu. Ft., 120V
Paragon Kiln SC-3 with Bead Door - $920.00  Your price - $780.00
same specs as SC-3
Paragon Kiln SC-3 with Window -   $940.00  Your price - $795.00
same specs as SC-3
Paragon  SC-3 with Door and Window - $960.00  Your price - $805.00
same specs as SC-3  (pictured at left)
All above come with 1/4" thick ceramic fiber shelf and test glass FREE! 
 
Extra fiber shelf - Retail - $13.40 - Your price - only $10.95
Hard Shelf Kit 7” x 7”, 4 posts, Fiber Shelf - Retail - $35.00 Your price - $28.00 Hard 7 x 7 shelf only - Retail $18.00 Your price - $15.50

ParagonKilnSCHotPink

 

Paragon Kiln SC 3
ParagonKilnSCTurquoise

The SC-2 is popular with seminar teachers because it fires fast, ships by UPS, and is easy to sell.

The new design has two separate heating elements in the left and right sides of the firing chamber. The back of the chamber has no element. Extensive testing shows that the heat distribution in the new SC-2 and 3 is more even throughout the firing chamber, because heat does not build up in the back of the kiln.

Even people who have no training in arts and crafts are intrigued by the Paragon QuikFire 6 high speed kiln. In only 30-45 minutes, you can fire and cool jewelry to room temperature with this innovative kiln. Minutes after you turn on the QuikFire the glass will glow red hot. Use the QuikFire for jewelry and previewing special effects for big projects.

Paragon Kiln Quik Fire

For: Ceramics, Fusing, Enameling, Silver, China painting

Manual
Paragon Quikfire 6 with Furniture Kit- Retail - $425.00 Your price - $390.00
6" w x 6" h x 6" deep, .19 Cu. Ft, 120V
Cone 03 - 2000 degrees
FREE! - 2 Square Shelves, Haik Brush, Glass Separator, Test Glass
NOT UL or CSA Certified

Small glass pieces can be fired and cooled to room temperature in only 30 to 40 minutes. Small ceramic pieces take only 40 to 50 minutes.

The QuikFire is a ceramic fiber shell with an embedded element. It measures 6" x 6" x 6" inside. The shell rests on a ceramic fiber base with steel stand. The QuikFire is rated to 2000F. It fires on 120 volts and needs no other heating source. At only 1560 watts, it uses less power than many hair driers.

Paragon Kiln Caldera

The Caldera fires rapidly to 2350F/1287C. With a separate top and bottom, it is stackable and completely portable. The kiln is easy to carry to seminars.

ParagonKilnCalderaXL

 

Caldera XL pictured above

For: Silver Clay, China, Ceramics and Glass

Manual
Paragon Kiln Caldera-S
8" x 8" x 6 3/4" deep, Cone 10 - 2350
, .25 Cu. Ft., 120V
Retail: $555.00 
Your price: $445.00

Automatic-Digital
Paragon Kiln Caldera
8" x 8" x 6 3/4" deep, Cone 10 - 2350, .25 Cu. Ft., 120V
Retail: $820.00 
Your price: $650.00

Paragon Kiln Caldera XL
7.5” x 7.5” x 9” deep, 2350, 0.29 Cu. Ft., 120V
Retail: $950.00
Your Price: $750.00

Paragon Kiln Caldera XL KS
7.5” x 7.5” x 9” deep, 2350
, 0.29 Cu. Ft., 120V
Retail: $835.00
Your Price: $660.00


Paragon Caldera-X- Blank Collar:  $130.00  Your price: $115.00
Paragon Caldera-BC - Bead Collar: $160.00  Your price: $140.00

Add 2” x 2” Window to Caldera (not XL or XL-KS)
- $35.00
Furniture Kit for Caldera:
$25.00  Your price: $20.00
Furniture Kit for Caldera XL: $55.00 Your price: $48.00

To strengthen the firing chamber, the firebrick corners are fitted together with L-shaped notches. This type of joint lasts longer than the butted joint and the "picture frame" mitered joint found on competitive brands. Rugged construction makes this kiln a little workhorse.

The Sentry Xpress kiln controller fires in either Ramp-Hold or Cone-Fire mode. Control both heating and cooling with
simple 3-key operation. The Caldera Kiln includes a safety on/off toggle switch.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.

paragon Kiln FIREFLY

Paragon Firefly, in manual and automatic

Paragon Kiln DigitalFirefly

Firing the MagicFuse requires skill. Because the kiln fires so rapidly, glass pieces should be limited in size to 2 layers of 1 1/2” x 1 1/2” or smaller. Larger sizes or additional layers of glass must be pre-heated for 5 minutes at a 50% power setting on the microwave. Otherwise the glass will break.  Annealing in a separate kiln is unnecessary for small glass pieces such as earrings and small pendants. The glass must also be free of glue, grease, and fingerprints. The rapid firing of these contaminants can cause the glass to break. Firing times may vary even within the same microwave oven. The firing time varies from one microwave to the next, and a MagicFuse kiln that is still warm from a previous firing takes less time to fire than a cold kiln. For these reasons, visually check the glass a minute or two before it is done. Then fire longer and check it again. Remove the kiln when the glass has fused just the way you had envisioned. The glass begins to fuse during the last 30 seconds of firing. This is why precise fusing is much easier by visually inspecting the glass.

The microwave oven The MagicFuse requires a microwave oven, which is not included. The voltage, watts, and amps shown in the specifications below are for a typical 1100 watt microwave oven. Since the MagicFuse does not contain heating elements, the electrical specs will vary depending on the microwave you own and the country where you live. If you remove the MagicFuse kiln after the glass has fused, the heat will not build up inside the microwave oven. The MagicFuse reaches higher temperatures than you will ever encounter in your kitchen. But the firing is so rapid that the heat does not have time to work its way to the outside surface of the kiln. You can fire the MagicFuse in the same microwave oven you use for cooking as long as you clean the microwave oven after each fusing session. If, however, you fire ceramic fiber paper, you might want to fire glass in a separate oven. This is because the fiber paper produces fumes.

For: Glass, Porcelain, Stoneware

Manual
Paragon Kiln Firefly

8" x 8" x 4 1/2" deep, Cone 10 - 2350 degrees, .25 Cu. Ft., 120V
Retail - $530.00 
Your price - $420.00 - FREE Furniture Kit

Automatic-Digital
Paragon Kiln Firefly
8" x 8" x 4 1/2" deep, Cone 10 - 2350 degrees, .25 Cu. Ft., 120V
3 Key Controller
Retail - $760.00 
Your price - $600.00 - FREE Furniture Kit


Add Window - Your price - $35.00

Furniture Kit
- $25.00  Your price - $20.00

Paragon Magic Fuse Kiln
pictured below

Paragon Kiln MagicFuse

Paragon Magic Fuse Kiln
Includes 6 - 1/2” ceramic posts, glass separator, and a 15-page instruction manual. Place the kiln on 3 posts inside the microwave and on the other 3 posts for cooling.
Retail - $165.00
Your price - $145.00
 

Extra supplies you will need - Microwave oven with metal interior that is at least 8" tall inside, 12" x 12" ceramic tile or ceramic kiln shelf, heat-resistant gloves, 1" paint brush for applying glass separator, notebook for keeping firing records, glass cutter and clear safety glasses.

When you call to order, ASK about our SPECIAL Package Fuse Glass Packs - Just the right amount of glass and goodies to make several pieces of jewelry right away!

Back to Kilns Main Page

Back to Main Paragon Kilns Page

Back to American Home Page

All prices are subject to change without notice due to manufacturer's price increases and fuel surcharges with shipping companies. We reserve the right to adjust pricing accordingly.
Please check with us prior to billing to be sure you have correct pricing.
Please be advised - Paragon Kiln Manufacturing Policy - Small hairline cracks in kiln brick are cosmetic and do not affect the firing performance of a kiln.

HPMCV
Discoverlogo

E-Mail Us!

[AmericanCeramicSupplyHome] [Kilns] [SkuttKilns] [ParagonKilns] [OlympicKilns] [AmacoExcelKilns] [ShimpoKilns] [HowtoChooseaKiln] [KilnVents] [FiringandConesSupportCenter] [CeramicSupportCenter] [Stilts] [Orton] [ReceivingKilnFreightDeliveries] [KilnWarranties] [FreeLayawayKilnsWheels] [PottersWheels] [PotteryEquipment] [CeramicPaintsGlaze] [CeramicMolds] [CeramicClasses] [CeramicBrushesTools] [CeramicClaySlips] [ACSCSiteIndex] [CeramicBooksVideosDVDs] [CeramicAccessories] [CeramicBisque] [AboutUs] [ACSCFiredArtsLinks] [ContactAmerican] [PaintYourOwnPottery] [CeramicStartupPackages]

MASTER DISTRIBUTORS FOR:
Mayco Colors and Bisque
Duncan Colors and Bisque - I Love to Create
Paragon Kilns     Orton Vents & Cones
Skutt Kilns   Thomas Stuart Wheels
Olympic Kilns
Creative Paradise  Lehman Ceramic Equipment
Royal Brushes   Shimpo Ceramic Equipment
AMACO/Brent Color, Wheels and Slab Rollers

WeShipVBox
UPSlogo

American Ceramic Supply Company has been selling and servicing ceramic kilns to the ceramic industry, schools, individuals and studios for over 38 years. Based in Fort Worth, Texas, American Ceramic Supply Company services and supplies ceramic equipment and supplies to traditional ceramic shops, paint your own pottery studios, ceramic potters, art teachers and art educators, ceramic and pottery finished ware producers, ceramic and pottery home based hobbyists. American Ceramic Supply Company provides education, training and consulting services to traditional ceramic shops, paint your own pottery studios, potters, art teachers and art educators, ceramic and pottery finished ware producers and home based hobbyists. American Ceramic Supply also educates and assists the architects, contractors, builders and electricians for our customers as they create their ceramic shops, paint your own pottery studios, ceramic rooms in their new schools and buildings and in their homes.

American Ceramic Supply Company and American Glass Supply Company sell ceramic kilns including Paragon Kilns, Skutt Kilns, Amaco/Excel Kilns, and Olympic Kilns. Paragon’s Kilns include the Touch and Fire electric automatic kilns such as the TnF 82, TnF23, TnF24, TnF27 and TnF28’s, the Ovation kilns, Dragon and Super Dragon kilns, Iguana Kilns, Caldera and Clamshell Kilns, Janus kilns, as well as the small kilns such as the SC series kilns, heat treating kilns, doll and porcelain kilns. Skutt kilns include the Kiln Master kiln series - the popular KM818, KM1018, KM1027, KM1218, KM1227-3 and KM1231 kilns, the Glass Master kiln line such as the GM814, GM1014, GM1214 - the very popular GM1414 coffin kiln, and the production glass kiln line - the GM818, GM1018 and the GM1227-3 as well as the Skutt Hot Start Pro Kiln and the new Firebox kilns - Firebox 8 and Firebox 14 including the clamshell kiln GM22. Through American Ceramic Supply Company, Olympic Kilns has fantastic gas and glass kilns, raku kilns, electric - manual and automatic kilns such as the Dual Media Kilns, the Champ kiln, the Freedom Series kilns, the Commercial Electric kilns, and the Torchbearer Gas kilns- both available as propane or natural gas kilns. Amaco kilns and Excel Kilns are very popular kilns with teachers and art educators. Front loading kilns, top-loading kilns, professional kiln line series, Fine Art kilns, Professional Kiln series, and metal enameling kilns are all part of the Amaco kilns and Excel kilns production series. Whether you need a pottery kiln, jewelry kiln, silver art clay kiln, glass fusing kiln, glass slumping kiln, knife heat treating kiln, clay tile production kiln, low fire kiln, high fire kiln, 120V kiln, 240V kiln, 208V kiln or even a 480V kiln! - American Ceramic Supply Company can provide you with just the kiln for your very special needs and desires to last you for a very long time!

American Ceramic Supply Company continues to sell, service, educate and provide on-going marketing and technical support to the ceramic and pottery industry. Our goals are the best customer service we can possibly offer, generosity of information to our customers so that they can succeed and accomplish their ceramic dreams and desires and
doing the right thing by God and Country.

American Ceramic Supply Company, Inc. - est. 1975
American Glass Supply Co.
The Pottery Consultant
copyright 1996 - 2014 - all rights reserved